VOGEL樣本下載,福鳥壓力傳感器/開關 DS-EP-40-D-4，DS-W1-4 DS-W1-4-S9 DS-W1-5，DS-W2-4 DS-W2-4-S9 DS-W2-5，DS-W3-4 DS-W3-4-S9 DS-W3-5，DS-W5-4 DS-W5-4-S9 DS-W5-5，DS-W8-4 DS-W8-4-S9 DS-W8-5，DS-W12-4 DS-W12-4-S9 DS-W12-5，DS-W20-4 DS-W20-4-S9 DS-W20-5，DS-W25-4 DS-W25-4-S9 DS-W25-5，DS-W30-4 DS-W30-4-S9 DS-W30-5
VOGEL壓力開關是負責監測壓力
系統需要以功能。
VOGEL壓力開關是一種重要的監測元件
集中潤滑系統。它是用來保持一個眼睛上
以下：
–泵單元的功能（壓力建立-和救濟）
–個案中的方向控制閥的功能
劃集中潤滑系統
–過濾功能（阻塞）
–油管
–空氣集中潤滑系統（泄漏，密封）。
時間的流逝之間在這一點上
泵機組或定向控制閥驅動為了填補
集中潤滑系統，在這一點上
VOGEL壓力開關響應是一個重要的指標，是否
集中潤滑系統isworkingfaultlessly。
歡迎您的！
：零七六九，八九九七八二零三，
零七六九，二二三零一零九八
一四九三零一一八一四 ：廖秀燕
在相反的情況下，經過的時間之間的點
這單位關閉，并在該點的zui小
壓力達到是系統的一個重要指標
泄壓。因此，優先，VOGEL壓力開關應
坐落在一個總-損失zui終集中潤滑系統。 VOGEL樣本下載,福鳥壓力傳感器/開關
從VOGEL壓力開關的電氣信號進行評估
集中潤滑系統的控制單元或機器的
控制系統可以，例如，可用于維護-
相關工作或關閉機器。
一些壓力開關可用于此任務。
他們在下面的概述上市。
對于選擇的重要標準是：
–的壓力開關水力特性
–電氣數據
–流體
–要求在開關頻率和使用壽命。
德國VOGEL福鳥壓力開關的（VOGEL）英文介紹：Pressure switches are responsible for monitoring the pressure a
system needs in order to function.
The pressure switch is an important monitoring element in
centralized lubrication systems. It is used to keep an eye on the
following:
– the functions of the pump unit （pressure build-up and relief）
– the functioning of the directional control valve in the case of
zoned centralized lubrication systems
– filter functions （clogging）
– the tubing
– air in the centralized lubrication system （leaks, seals）.
The amount of time elapsing between the point at which the
pump unit or directional control valve is actuated in order to fill
the centralized lubrication system and the point at which the
pressure switch responds is an important indicator of whether the
centralized lubrication system isworkingfaultlessly.
In the opposite case, the time elapsing between the point at
which the unit is switched off and the point at which minimal
pressure is reached is an important indicator of the system's
pressure relief. So, preferentially, the pressure switch should be
located at the end of a total-loss centralized lubrication system.
The electrical signal from the pressure switch is evaluated by the
centralized lubrication system's control unit or the machine's
control system and can, for example, be used for maintenance-
related jobs or to shut down the machine.
A number of pressure switches are available for this task.
They are listed in the following overview.
Important criteria for the selection are:
– the hydraulic characteristics of the pressure switch
– the electrical data
– the fluid
– demands made on switching frequency and service life. VOGEL樣本下載,福鳥壓力傳感器/開關 |
