首頁 > 技術文章
賀德克EDS1700技術參數（HYDAC壓力開關資料）
With its integrated pressure measurement cell, the EDS 1700 provides the user with a 4-character display and the 4 switching outlets with all of the advantages of a modern electronic pressure switch. 4 switching points and reset points can be set independently of one another very easily by means of a foil keyboard. For optimum integration in monitoring systems （e.g. with SPS）, an analogue output （4 ... 20 mA or 0 ... 10V） is available for integration in monitoring systems （e.g. with SPS）. The main areas of application of the EDS 1700 are in the area of hydraulics and pneumatics. The device is used ideally wherever frequent switching procedures （several million）, continuous switching point accuracy or simple and precise setting capability are required.
Integrated pressure sensor with DMS on stainless steel diaphragm
Accuracy 0.5% or 1% FS
4-character digital display
Simple handling through key programming
4 limit value relays, switching points and reset points can be adjusted independently of one another
Analogue output signal can be selected
Many helpful additional functions
Installation position can be selected （pressure connection below/above, keyboard and display can be rotated by 180°）
Adjustment of any display areas for the depiction of the measurement values, e.g.: in kN, kg, psi, ...
賀德克EDS1700技術參數（HYDAC壓力開關資料） HYDAC電子壓力開關提供了眾多的優勢，相比機械式壓力開關和接觸壓力計。他們說服雖然更高的精度，不受磨損，長期穩定，操作簡單，高開關周期數，除其他事項。
類型系列
沒有測量值顯示
EDS 4000,移動和固定的液壓系統，設置前工程或可編程，
根據爆炸危險環境中的版本與ATEX，CSA，IECEx認證
EDS 810為OEM應用在工業和移動部門的，工廠預置，
ECE型式批準為公共道路交通，可選帶IO-Link接口
EDS 710系列應用在工業和移動部門的腔體的尺寸是緊，非常小，設計緊湊，設置出廠價
410，EDS為OEM應用，出廠時預置或可編程
EDS 1700年，4個繼電器輸出，4個字符的LED顯示屏，許多輔助功能，
通過調節箔鍵盤
技術
厚層在陶瓷膜片的DMS（低壓力范圍）
不銹鋼隔離膜片上的薄膜的DMS（低壓和高壓的范圍內）
標準壓力范圍
在0 ... 1和0 ... 600/1000巴的相對壓力，具體取決于版本
高達2.5 bar壓力
調整也PSI和MPa
其他壓力范圍和特殊調整后，也要求
賀德克EDS1700技術參數（HYDAC壓力開關資料）
